| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Advice needed: nitro over waterborne http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=41300 |
Page 1 of 1 |
| Author: | SteveSmith [ Tue Sep 03, 2013 9:06 am ] |
| Post subject: | Advice needed: nitro over waterborne |
I've got a guitar that was finished in PolyWhey waterborne lacquer, I've finished it twice and I do not like the way it came out. I would like to shoot nitro over it. My plan is to sand it down with 320 then shoot 2 coats of 1# shellac followed by vinyl sealer and then nitro. Anyone see anything wrong with this plan or have a different recommendation? |
|
| Author: | SteveSmith [ Wed Sep 04, 2013 7:17 am ] |
| Post subject: | Re: Advice needed: nitro over waterborne |
I've decided to take it back to bare wood and start over with a nitro finish. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|